Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Replacement freehub body for Stan's NoTubes 3.30R and 3.30RTi rear hubs.
$185.99 - $187.99
Convert your SRAM Roam 60, 50 or Rail 50 wheels to SRAM 11-speed with the XD Driver Body and Axle Cap. XD is a cassette driver body that allows the use of a 10-tooth small cog and provides an improved interface with the cassette. The axle cap is specific to the XD driver and your preferred axle choice.
$1,804.00 - $2,338.00
When Zipp gave their top engineers in The Nest advanced development lab the task of shedding more weight from their lightest carbon clincher wheelset, the 202 Firecrest, while also improving rolling friction, aerodynamics, and braking, it was a very tall order. When they asked them to do all of this without sacrificing durability, it looked like an impossibility. But the NSW advanced development team delivered on every request and built the ultimate climbing wheelset, a climbing wheelset strong enough to use on every ride. Engineered to be the fastest accelerating carbon clincher Zipp has ever made, 202 NSW flies up the toughest climbs, and then shaves even more time off of the descents to follow. And because extracting greater speed on the mountain is only half the battle, they built the 202 NSW to deliver the lowest aerodynamic drag available for a rim of this depth for speed everywhere else. In order for a climbing wheelset to be world beating it has to do more than simply deliver low weight; it has to deliver uncompromising performance on every level. This is why Zipp engineers in The Nest chose to enhance the world’s fastest climbing carbon clincher, the 202 Firecrest. With a new lighter carbon fiber layup for the 32mm deep 202 NSW, they’ve dropped weight where it matters most, at the outer edge of the wheel, while maintaining the durability and lateral stiffness that Firecrest is famous for. Then they reduced aerodynamic drag with ABLC Sawtooth technology and used ImPress graphics to ensure that nothing stood between the air flowing over the rim and the dimples made to smooth that flow. Knowing that there is no benefit to a wheelset that climbs fast and descends slow, NSW engineers incorporated their Showstopper brake track for the most confidence inspiring rim braking performance available, whether the road is wet or dry. To further improve the wheelset’s rolling efficiency, the 202 NSW rim is laced to their groundbreaking Cognition hubset. Built around their Axial Clutch freehub technology, the Cognition rear hub is engineered to maintain speed when coasting by disengaging the ratchet mechanism. This technology enables the Cognition rear hub to deliver far less rolling friction than wheels using conventional freehubs—a real advantage when fighting through rolling foothills or when spun out on long descents. Engineered for speed when approaching, ascending, traversing, and descending the world’s toughest mountain roads, the Zipp 202 NSW is a wheelset that can only come from one place, The Nest, where the world’s fastest wheels are made.
Hub Adapters for all Oozy hubs and 2016 Spike hubs.
In order to answer the call from Nairo Quintana and the other champions, Campagnolo created the Bora Ultra 35: perhaps the best wheel out there in terms of performance both while climbing and on mixed routes. The Bora Ultra's innovative AC3 (All Conditions Carbon Control) Technology means maximum safety when braking in any condition, providing shorter stopping distances and excellent braking modulation. And, thanks to its wide, aerodynamic profile, differentiated hub diameter, and CULT bearings, all cyclists can now enjoy the same performance Campagnolo provides its Pro-Tour champions. - 35mm carbon profile offers maximum lightness and aerodynamics - Designed for domination uphill and on the flats - CULT bearings deliver up to nine times the smoothness of standard bearings and are designed to resist oxidation, preserve performance over time - Carbon rim and hubs ensure good stiffness and extremely low weight - Aerodynamic profile spokes slice through the air - Exclusive G3 spokes ensure better balancing of the traction force on the wheel, drastically reducing all its stress - Weight: 1,360 grams
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
- High performance Wheelset with internal vibration damping, ideal for DH and Freeride. - Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
The partner in crime to WeThePeople's Supreme Rear Cassette Hub, the matching Supreme Front Hub uses high-quality Japanese sealed bearings and a beefy, heat-treated 4130 chromoly axle held on with 10mm female bolts. Match it up with WTP nylon fiberglass Supreme front hub guards and you have a dialed front-end setup. - 14mm hollow/hardened heat treated chromoly axle - 10mm female bolts
- High performance alloy wheelset competition tuned for World Cup level DH racers - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - A hand built 32H, 3-cross configuration ensures maximum stiffness and durability offering increased engagement, lighter weight, and improved adaptability - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - 15mm and 20mm axle adapters included for front wheels - Most non Boost adapters available for the rear wheel
- Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width is extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use without negative squaring off of tire profiles. - Ideal for DH and Freeride.
The new Flow MK3 is wider, stronger, and lighter. Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width, offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing thanks to increased lateral stiffness and durability. The new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. - 29mm internal width for tires up to 2.8" - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Built on the proven success of our Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail and All-mountain tires
$65.99 - $74.99
Quick Release Model • Model Number: HB-M8000 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: QR • Axle Length: 100mm • Axle Diameter: 14mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 41mm • Center to Flange (Left): 44mm 15x100mm Thru-Axle Model • Model Number: HB-M8010 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: 15mm E-Thru • Axle Length: 100mm • Axle Diameter: 17.5mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 44mm • Center to Flange (Left): 44mm
Shimano's Dura-Ace C60 Carbon Tubular disc-brake wheel provides improved rigidity thanks to a wide flange hub and offset rim so you can reach that next level of aerodynamic performance. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubular - Center-lock Disc - E-thru axles
Shimano XT M8000 Front Hub Quick Release Skewer
Shimano's Dura-Ace C60 carbon clincher wheelset provides improved rigidity thanks to a wide flange hub and offset rim so you can reach that next level of aerodynamic performance. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim
$274.99 - $279.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
Shimano Alfine Centerlock Dynamo Front Hub - Compatible with 26 to 28" wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Center to Flange: 28.5 R , 20 L - Color: Black - Defined Color: Black - Flange Diameter: 70 R , 70 L - Front Axle: QR x 100mm - Hub Drilling: 32, 36 - Hub/Brake Compatibility: Center-Lock Disc - Spoke Interface: J-Bend - Weight: 575 g
$94.99 - $99.99
Shimano's ZEE Rear Freehub is a quick engaging, smooth-running hub that doesn't drain the bank account. It features quality sealing, adjustable angular-contact bearings, and rotates on an extra-stiff one-piece rear axle with integrated cone construction. It's Center Lock compatible and is available in 135, 142 and 150mm configurations.
$69.99 - $70.99
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
Shimano XT FH-M8000/8010 Front Hubs - All-weather durability, reliable performance and lighter weight - Cone races ground by a Cubic Boron Nitride tool for smooth rolling durability - Center Lock disc brakes provide reliable braking power - Rotor lockring not included - Series: Deore XT - Disc Rotor Mount: Center Lock Disc - Axle Type: QR - Axle Length: 100mm - Axle Diameter: 14mm - Contact Sealing: Labyrinth and Contact - Spoke Holes: 32H - Center to Flange (Right): 41mm - Center to Flange (Left): 44mm
Shimano's Dura-Ace C60 Carbon Tubular wheel provides improved rigidity thanks to a wide flange hub and offset rim so you can reach that next level of aerodynamic performance. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim
This is a set of replacement internals for Alfine SG-S700 11-Speed internally geared hubs, allowing you to reuse your old Alfine shell with brand new internals, making it like a new hub. - 187mm axle width
Disc design for maximizing aerodynamic efficiency. - Carbon and rohacel sandwich construction - 2x2 3K Twill weave pattern with matte coating - Ultegra 6800 HUB (11-speed compatible) - Oval cut-out suitable for longer valves - Includes PRO wheelbag and valve extensions - Weight: 1330g
Designed for today's wider tires, the Sentry MK3's patented low-profile sidewall and lightweight 6069 alloy construction delivers width without the weight. Stan's patented BST rim design allows a tire to expand to its full volume without distorting its shape, and the 32mm internal width of the Sentry MK3 is more stable with 2.50"-3.00" tires. The result is less rolling resistance, more traction, and incredible handling. The Sentry MK3 wheels are a great upgrade for anyone looking for the traction and control needed to take on even the most difficult trails. Stan's updated Neo hub includes a stronger axle and reliable Durasync six pawl freehubs. The Sentry MK3 proves wider can mean faster. Sentry MK3 wheels include pre-installed tape for tubeless use and presta valve. - Patented BST design for the easiest and most reliable tubeless - 32mm internal width for stability with wider tires - Gradual taper rim shape and 6069 alloy is lighter, stiffer, and stronger Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.50"-3.00" Trail tires
- Bombproof all-purpose wheelset, hand built, 32H J-hook configuration with 3-cross spoke pattern - The corrugated rim center, a brand acclaimed technology, makes it more rigid and allows the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable - Delivers exceptional strength and stiffness at a value unmatched in its class.
Upgrade hoops for your kid's 24” MTB. The SPOON 28-24 is a durable six series alloy rim model featuring SPANK’s patented OohBah profile design. A 23mm internal width accepts a wide range of 24” tires from street to DH. Whether you’re looking to spruce up your street bike, or out to upgrade your kid’s MTB, SPOON 28-24 rims are an ultra-strong, ultra-safe option at a value oriented price. Key Technologies: OohBah Tubeless: Not recommended ERD (mm++): 474 ETRTO (mm): 507x23 Discipline: Kids
Page 1 of 21 Next page